Elucidating structure and dynamics of crystalline α-zirconium phosphates intercalated with water and methanol by multinuclear solid-state MAS NMR: A comprehensive NMR approach

Solid-state NMR experiments on ²H, ³¹P, ¹³C, and ¹H nuclei, including ³¹P T₁, ¹H T₁, and ¹H T_1ρ measurements, as well as on the kinetics of proton-phosphorus cross-polarization have been performed to characterize the crystalline and amorphous α-zirconium phosphates, which were intercalated with D₂O and/or CD₃OD. The ¹³C{¹H} CP MAS NMR experiment performed for compound 1-CD ₃ OD (Zr (HPO₄)₂ ^. 0.2CD₃OD) with carbon cross-polarization via protons of phosphate groups has provided a prove that the methanol was intercalated into the interlayer spaces of this compound. The variable-temperature ²H solid-echo MAS NMR spectra of intercalated compounds demonstrated that the methanol molecules, in contrast to the mobile water, were immobile, keeping, however, free CD₃ rotations around the C₃-axis. It has been demonstrated that the intercalated species, D₂O and CD₃OD, do not affect the high-frequency motions of the phosphate groups. By utilizing local structural models that satisfy the constraints of the experimental data, it has been suggested that the immobile methanol molecules are located in the cavity between two neighboring layers of the zirconium phosphates. Thus, the present work illustrates the reliable criteria in a comprehensive NMR approach to structural and dynamic studies of such systems.     

Y3+/Li+和Y3+/Na+双掺杂氟化钡快响应闪烁晶体

氟化钡(BaF₂)晶体是已知响应最快的闪烁晶体,在高能物理、核物理及核医学等领域有着广泛的应用前景。抑制BaF₂晶体的慢发光成分对其工程应用至关重要。本文利用坩埚下降法制备了高Y³⁺掺杂浓度5%、8%、10%(摩尔分数)的BaF₂晶体,并采用Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂的方法形成电荷补偿阻止间隙F^-的产生,制备了双掺杂型BaF₂快响应闪烁晶体,进而基于优化的5 ns和2 500 ns时间门宽测试方法,研究了Y³⁺掺杂浓度以及Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂浓度对BaF₂闪烁晶体快/慢成分比的影响规律。结果表明,生长的高浓度Y³⁺掺杂BaF₂晶体的光学质量优异,在220 nm和300 nm处透过率分别高于90%和92%;随着Y³⁺掺杂浓度由0提高至10%,BaF₂晶体的慢发光成分显著降低,快/慢成分比由0.15提高至1.21;生长的Y³⁺/Li⁺及Y³⁺/Na⁺共掺杂BaF₂晶体的慢发光成分较Y³⁺掺杂BaF₂晶体进一步降低,快/慢成分比最高分别可达1.63和1.61。研制的双掺杂BaF₂快响应闪烁晶体有望应用于高能物理、核物理前沿实验等重要领域。     

Molecular dynamic study of dielectric polarization and ferroelectricity in a model polar polymer

Molecular dynamics simulations are used to explore the polarization response of a lamellar crystal consisting of folded chains of a highly simplified model polar polymer. The system is based on a united atom model of polyethylene with constrained bond lengths and bond angles, and it is endowed with artificial partial charges placed on the united atoms to give it a simple polar character. Simulations performed with various temperatures, electric field directions, and electric field application histories reveal a complicated sequence of reorientation processes, including pronounced ferroelectric behavior. The sequence includes a weak, temperature‐independent prompt response, and a slow‐rising delay regime with stretched exponential behavior and thermally‐activated reorientation parameters consistent with trans‐gauche (TG) barrier crossings in the amorphous phase. When the delay regime has progressed sufficiently, a primary large‐amplitude response due to organized rotation of large subsegments in the crystalline phase occurs in a rapid manner that requires relatively few TG barrier crossings. A final, extremely slow rise in residual polarization completes the sequence. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 740–759     

A purge and trap technique to capture volatile compounds combined with comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry to investigate the effect of sulfur‐fumigation on Radix Angelicae Dahuricae

Sulfur‐fumigation is known to reduce volatile compounds that are the main active components in herbs used in herbal medicine. We investigated changes in chemical composition between sun‐dried and sulfur‐fumigated Radix Angelicae Dahuricae using a purge and trap technique to capture volatile compounds, and two‐dimensional gas chromatography/time‐of‐flight mass spectrometry for identification. Using sun‐dried Radix Angelicae Dahuricae samples as a reference, the results showed that 73 volatile compounds, including 12 sulfide compounds, were found to be present only in sulfur‐fumigated samples. Furthermore, 32 volatile compounds that were found in sun‐dried Radix Angelicae Dahuricae samples disappeared after sulfur‐fumigation. The proposed method can be applied to accurately discriminate sulfur‐fumigated Radix Angelicae Dahuricae from different commercial sources. Copyright © 2014 John Wiley & Sons, Ltd.     

On pre-exit joint occupation times for spectrally negative Lévy processes

We adopt a new approach to find Laplace transforms of joint occupation times over disjoint intervals for spectrally negative Lévy processes. The Laplace transforms are expressed in terms of scale functions.     

Probing the early stages of thermal fractionation by successive self‐nucleation and annealing performed with fast scanning chip‐calorimetry

The thermal fractionation kinetics of a linear low‐density polyethylene (LLDPE) during Successive Self‐Nucleation and Annealing (SSA) is investigated by fast scanning chip‐calorimetry (FSC), by systematically varying the holding times (t_s) at each fractionation temperature (T_s). The range of explored fractionation times spans four orders of magnitude, from 0.001 to 10 s. Discernible thermal fractions are already detected in the very early stages of the process, at t_s shorter than one second. As t_s increases, the melting endotherm after SSA indicates a progressive lamellar thickening and narrowing of the thicknesses distribution of the various crystalline fractions. The largest variations are observed for the families of crystals containing the longest crystallizable sequences, which also undergo a change of their relative content as a consequence of self‐nucleated crystallization at T_s. The quality of the thermal fractionation obtained in 10 seconds with FSC is equivalent to that of conventional differential scanning calorimetry SSA (t_s = 300 s). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2200–2209     

Relaxation Dynamics and Magnetic Anisotropy in a Low‐Symmetry DyIII Complex

The magnetic behaviour of a Dy(LH)₃ complex (LH^? is the anion of 2‐hydroxy‐N′‐[(E)‐(2‐hydroxy‐3‐methoxyphenyl)methylidene]benzhydrazide) was analysed in depth from both theoretical and experimental points of view. Cantilever torque magnetometry indicated that the complex has Ising‐type anisotropy, and provided two possible directions for the easy axis of anisotropy due to the presence of two magnetically non‐equivalent molecules in the crystal. Ab initio calculations confirmed the strong Ising‐type anisotropy and disentangled the two possible orientations. The computed results obtained by using ab initio calculations were then used to rationalise the composite dynamic behaviour observed for both pure Dy^III phase and Y^III diluted phase, which showed two different relaxation channels in zero and non‐zero static magnetic fields. In particular, we showed that the relaxation behaviour at the higher temperature range can be correctly reproduced by using a master matrix approach, which suggests that Orbach relaxation is occurring through a second excited doublet.     

Long-time simulation of a highly oscillatory Vlasov equation with an exponential integrator

We change a previous time-stepping algorithm for solving a multi-scale Vlasov–Poisson system within a Particle-In-Cell method, in order to perform accurate long-time simulations. As an exponential integrator, the new scheme allows us to use large time steps compared to the size of the oscillations in the solution.     

Chitosan/Ce(IV) redox polymerization‐based amplification for detection of DNA point mutation

Polymerization‐based signal amplification, a technique developed for use in rapid diagnostic tests, hinges on the ability to localize initiators as a function of interfacial binding events. We report here a new DNA detection method in which polymer growth in redox‐polymerization is used as a means to amplify detection signals. The introduction of biotin‐labeled chitosan (biotin‐CS) with highly dense amino groups into the polymerization amplification as macromolecular reducing agent, beneficially simplifies amplification operation, as well as, provides a large amount of initiation points to improve the sensitivity of detection. DNA hybridization, SA and biotin binding reactions led to the attachment of CS on a solid surface where specific DNA sequences were located. With the addition of the mixture containing monomer AM, crosslinker PEGDA and oxidant CAN onto the CS location, the growth of polymer films was triggered to render the corresponding spots readily distinguishable to the naked eye. Direct visualization of 0.21 fmol target DNA molecules of interest was demonstrated. Non‐small cell lung cancer p53 sequence was further selected as a proof‐of‐principle to detect DNA point mutation. The proposed method exhibited an efficient amplification performance for molecule detection, and paved a new way for visual diagnosis of biomolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1929–1937